Guide
Counting canvas threads and intersections
Understand holes, canvas threads, intersections, and stitch spans with a clear counting example for needlepoint diagrams.
When a needlepoint instruction says to work “over two threads,” count the canvas threads crossed between the starting and ending holes. Do not count the starting hole as thread one. The working thread in your needle is a separate thing.
This distinction explains many one-hole errors. A hole is empty space. A canvas thread forms one edge of that space. An intersection is the crossing of a horizontal and vertical canvas thread.
Start with a single crossing
Choose one hole and find the diagonally adjacent hole one space to the right and one space up. A diagonal stitch between them crosses one horizontal and one vertical canvas thread at their intersection. That is the scale of a basic tent stitch described in the RSN continental reference.
For a longer diagonal, move two hole-spaces right and two up. The line crosses two horizontal and two vertical canvas threads. You have made one stitch with a larger span, not two separate stitches.
The RSN mosaic explanation combines short and longer diagonals in one unit, which makes it a useful exercise after this counting distinction is clear.
Use coordinates for a tricky movement
Imagine that your starting hole is at column 0, row 0. An endpoint at column 2, row 2 is two spaces across and two spaces up. The intermediate hole at column 1, row 1 is passed over; you do not put the needle down there unless the instructions tell you to.
For a slanted stitch that spans two threads horizontally and one vertically, count each direction separately. It is not the same geometry as a two-by-two diagonal. Use the stated endpoint rather than estimating the apparent angle in a small printed image.
Check a repeat, not just one stitch
A unit may occupy more space than any one of its stitches. Mark its left and right limits on a working diagram and count the distance between matching points in adjacent repeats. That distance controls the pattern placement.
On 13 and 18 mesh, a repeat using the same number of canvas units has the same counted structure but a different physical size. The mesh comparison guide explains how count becomes inches; changing mesh does not change the definition of “over two.”
Before starting a full area, work one unit and compare its footprint with the drawing. If it is one hole too wide, check whether you counted holes instead of crossed threads or included both endpoints in the count. Reading numbered diagrams then connects the correct endpoint positions to the order in which the needle visits them.
Keep learning

Learning path
Your first needlepoint canvas: a learning path
Follow a linked beginner path from choosing a canvas and planning its finish to starting threads, stitching, and checking your first project.

Guide
Choosing a first needlepoint project
Choose a first needlepoint project by comparing design complexity, mesh, included supplies, finishing needs, and a practical buying checklist.
